- Director of Product Marketing
- Mixed Signal Design Engineer (Junior and Senior positions)
- Sr. Characterization Engineer
- Sr. MEMS Development Engineer
Please send your resume to ns@sitime.com
The Director of Product Marketing will play a very key role in SiTime’s growth and success. The candidate will be responsible for delivering results in the following areas:
- Product roadmaps
- Product and company positioning (Strategic messaging, Marcom, PR)
- Revenue and design wins on their products and/or regions
- Go-to-market strategy and execution
- Strategic partnerships
Specific Responsibilities:
- Participate in product and company strategy development
- Develop roadmaps, drive internal alignment and external validation for business case justification, as well as manage product lifecycle
- Create high-level MRDs and detailed functional requirements
- Work with internal and external stakeholders to validate and successfully negotiate business and technical requirements. Develop alternatives, resolve issues, overcome obstacles and continue to move the product development to the next stage.
- Manage the rollout of new products to customers, sales channels and media, including development of competitive analysis, product positioning, pricing and selling proposition.
- Develop and deliver sales channel training and documentation
- Assist in the development of the company brand
- Company and product positioning
- Communicating messages externally and internally to media, analysts, customers and employees
- Work with engineering, sales, and operations to manage product lifecycles
- Develop processes and workflows as required
Requirements:
- BSEE or a Bachelor's degree in business required. MBA is a plus.
- 10+ years of successful semiconductor marketing experience. Knowledge of PLLs and timing issues is a plus. Successful startup experience is a plus.
- Detailed knowledge of frequency issues such as phase noice, jitter, ppm error, and skew is a plus.
- Ability to travel up to 25%, including international
- Ability to deliver results with minimal supervision
- “Can do” positive, enthusiastic attitude
- Excellent oral and written communication skills
Please send your resume to ns@sitime.com
Design MEMS resonators for the next generation of high-volume timing devices that will replace quartz crystals. Work encompasses improvement of existing designs and innovation of next-generation technology.
Responsibilities
- Design of prototype and production MEMS devices.
- Perform structural and electromechanical analysis of resonators using finite element and analytical modeling.
- Characterize new designs using laboratory test equipment and software.
- Maintain and improve SiTime's design and characterization infrastructure.
- Develop performance specifications and characterization plans.
- Interface with CMOS designers and fabrication engineers to ensure product functionality.
- Organize and lead cross-functional design reviews and optimization efforts.
- Organize documentation through product release.
- Provide technical support for the product in production.
Requirements
- Master's or PhD in ME, EE, or Physics with four years experience in MEMS design, simulation, characterization, and test.
- Fluent in Matlab.
- Finite element analysis experience, especially structural analysis (COMSOL, ANSYS, or similar).
- Experience with mask layout in Cadence Virtuoso, Mentor Graphics C Station, L-Edit, AutoCAD, or similar tool.
- Printed circuit board design experience preferred.
- A track record of innovation and success working with multi-disciplinary teams on complex technical problems.
- Strong communication and organizational skills and an ability to work in a fast paced environment.
Mixed Signal Design Engineer (Junior and Senior positions)
The mixed-signal circuit design engineer will be contributing to the development of SiTime’s integrated circuits. SiTime’s growth is fueled by an exciting line of timing devices, highlighted by programmable oscillators that are the heartbeats of cutting edge electronics. SiTime addresses the $5B timing market with leadership products that are the smallest, thinnest, most robust, reliable, and configurable.
The successful candidate will be responsible for design of analog and mixed-signal components at the block level, meeting their architectural requirements and technical specifications. Depending on the level of responsibility, the candidate may also contribute to the architectural definition of these blocks, and also to the chip integration. The design engineer will perform the necessary calculations, design and verification simulations to ensure the block meets all its requirements (both at the schematic level, and post layout extraction), and DFT and DFM are fully considered. The candidate will work closely with the layout designers to ensure the layout is completed properly, using all best known methods. The designer will be responsible for proper documentation of assigned blocks, and for holding preliminary and final design reviews. The candidate will actively participate in the chip bring up, evaluation and characterization (with emphasis on owned blocks). The candidate will address questions and issues related to his/her blocks raised by other personnel, such as product, characterization, test, or application engineers.
The ideal candidate would have direct experience designing successful components for products where very high volume production at high yields and low cost is simultaneously accompanied by rigorous technical requirements. These requirements typically apply (but are not limited ) to analog and digital blocks such as bandgaps, regulators, data converters, synthesizers, analog and digital filters, oscillators, and high-performance I/O’s. The candidate should be comfortable and thrive in a dynamic environment where innovation, collaboration, rigor, and flexibility are the norm.
Requirements:
- MS with minimum of 3 years of experience or Ph.D., in Electrical Engineering
- Detailed knowledge of CMOS design, CAD and EDA tools, design kits, layout, and transistor models
- Strong background in analog/RF and/or mixed signal designs for blocks such as regulator, data converter, filter, VCO, PLL, charge pump, bandgap, I/O
- Some familiarity with automated digital design (Verilog, synthesis, place & route, STA, and mixed-mode simulations)
- Understanding of signal integrity
- Knowledge of programming languages: Oceanscript, Matlab, and VerilogA.
- Ability to perform own circuit layout for critical blocks
- Background in timing devices, a plus
- Familiarity with noise analysis
- Experience with designing very low power circuits
- Familiarity with chip-level power delivery and integrity, DFT, DFM, EOS and ESD, latch-up
- Familiarity with standard CMOS processes, such as 180nm, and 130nm nodes
- Some knowledge of CMOS device-level reliability
- Excellent written and verbal communication
- Must be very well organized, with great time-management capability
- Ability to work independently, with minimum supervision
SiTime Corporation develops MEMS-based silicon timing solutions. SiTime addresses the $5B timing market with leadership products that are the smallest, thinnest, most robust, reliable, configurable, and offer the shortest lead times. The company’s solutions are the heartbeat of cutting-edge electronic products, such as fiber-to-the-home (FTTH) equipment, computing devices, graphics cards, disk drives, mobile phones and high capacity SIM cards.
Job Requirements:
- BS/MS in EE or ME or related area
- 7-10 years of experience performing characterization of mixed-signal ICs and/or timing devices
- Strong programming and data analysis skills (Matlab knowledge a plus)
- Hands-on familiarity with lab instrument automation, capabilities, and limitations – Power supplies, DMMs, oscilloscopes, frequency counters, etc
- Excellent communication and problem-solving skills
- Experience characterizing MEMS devices a plus
- Experience in mixed signal PCB and characterization system design a plus
Job Responsibilities:
- Performing detailed characterization of programmable oscillators, mixed-signal ICs, and MEMS resonators.
- Working closely with Circuit Design to verify, bring-up, and evaluate first silicon
- Working closely with MEMS Design and Fabrication to characterize and qualify new MEMS designs and process changes
- Working closely with Test Engineering to develop test, trim, and programming protocols
- Working closely with Marketing to finalize and publish customer datasheets
- Working closely with Operations to ensure new products transition smoothly into production
- Providing comprehensive, documented feedback on all aspects of oscillator performance to Circuit Design, MEMS Design and Fabrication, Test Engineering, Marketing, and customers
- Developing characterization systems (hardware and software) that enable fast and thorough characterization
- Performing detailed FA on non-compliant devices
- Playing a key role in defining enhancements for next-generation SiTime products.
What is in it for you:
- Innovative MEMS company
- Growth opportunities
- Competitive pay
- Comprehensive benefits